Brick Pattern Steel
Brick pattern steel coil gives you the classic and lasting look of brick, but without all the weight, price, or hard work that comes with real bricks. This product is made from tough steel and comes ready to use with a printed or raised pattern that looks like real brick. It brings you the style, feel, and variety of brick while also offering the strength, usefulness, and lower cost of steel.
| Attribute | Details |
|---|---|
| Standard |
|
| Material | DX51D, DX52D, S350GD, S550GD |
| Thickness | 0.12 – 3.0 mm |
| Width | 20 – 1500 mm Normal widths: 914 / 1000 / 1219 / 1250 / 1500 mm |
| Type of Coating Process |
|
| Coating Types |
|
| Coil ID | 508 mm / 610 mm |
| Coil Weight | 3-8 tons |
Advantages of Brick Pattern Steel Coil:
Classic Brick Look: This gives the feel and style of many brick types, from red brick that looks old to grey brick that looks new.
Very Strong and Lasts Long: The steel base stands up well to hits, bad weather, and rust.
Light and Simple Build: It weighs much less than real brick, so you do not need as much support. It also saves money when you build.
Saves Money: The costs for what you use and setting it up are much less than real brick.
Simple to Set Up: You can shape, cut, and attach it easily. This makes setup fast and simple.
Needs Little Care: You do not have to do much to take care of it. It almost never fades, cracks, or peels.
Many Design Choices: There are lots of brick looks, colors, and textures that you can pick from.
Coil Form Is Handy: You can get it in long pieces which are good for putting up many parts at the same time. This helps cut down waste.
Typical Applications:
Outside Wall Cladding (Needs a code review)
Inside Wall Panels and Accent Walls
Siding and Trim
Mobile Homes and Recreational Vehicles (RVs)
Commercial Building Fronts (Needs a code review)
Signage and Building Details
Modular Construction Projects
Manufacturing and Finishing:
The brick pattern gets put on the steel coil using a few different methods.
Direct Printing: High-quality digital printing is done with UV-safe inks. This helps make it last longer.
Embossing: A raised brick feel is made on the steel surface. This helps the steel look more like real bricks.
Film Lamination: A brick-pattern film is put onto the steel coil before use.
Combination Techniques: A mix of printing and embossing is used. This gives the best, real look.
Important Considerations: When you choose brick pattern steel coil, you should think about the thickness of the steel. Look at the coating too, like if it is polyester or PVDF. Pay attention to the brick pattern. It is also important to check the fire rating you need. Make sure the coil follows local building codes, especially if you plan to use it on the outside of a building.